MASTER MPS UPS 10-800kVA

An Uninterruptible Power Supply (UPS) for the power protection of corporate wide and large network applications.
Master MPS provides maximum protection for vital ‘mission-critical' networks, security applications (electro-medical) and industrial applications thanks to its outstanding mechanical and electrical design. The UPS has an extremely outstanding mechanical and electrical design: isolation transformer on the inverter, high short-circuit current and sinusoidal absorption with low THDi.
Master MPS is also available in industrial 220Vdc and 400Hz frequency converter formats. The latest development includes the Master HP series (100-250kVA) which has an IGBT-based rectifier. This provides an extremely low input harmonic distortion and a high input power factor.

Uninterruptible Power Supply Three Phase output power protection

The Master MPS 10-800kVA UPS series uses on-line technology (VFI) with an isolation transformer on the inverter output. The load is powered continuously by the inverter with a filtered, stabilised and regulated sinewave supply. The input and output EMI filters considerably increase the immunity of the load to mains disturbances and surges, even on bypass.
When the mains fails, the inverter which is constantly powering the load simply draws power from a battery (internal on some models) to provide complete protection. Protection from extended blackouts can be achieved using battery extension packs or a combination of battery extension packs and a generator.

Compatibility and Efficiency

Master MPS has been designed for maximum generator and MV/LV transformer compatibility. The UPS has a progressive rectifier start-up and the option to reduce battery charging current during recharge periods. In addition overall efficiency has been increased with system loss reductions achieved over traditional UPS in the transformer windings and power factor correction assemblies, and the reduction of current harmonics generated by the UPS itself.
Additional battery extension packs allow the standard battery runtime to be extended up to several hours.

Battery Management Technology

Master MPS UPS use a newly developed battery management technology to help them achieve maximum battery performance and prolonged design life. Specific features of the new battery management technology include:

• Battery charging is set on two voltage levels to optimise recharge current and reduce recharge times
• Temperature compensated charging with protection against deep discharges to reduce ageing and prolong battery life
• Use of a charge blocking system to reduce electrolyte consumption and further lengthen life of sealed lead acid (VRLA) batteries
• Automatic battery testing to provide advanced indication of potential battery failures

Master MPS is also compatible with a variety of battery technologies: open-vase lead acid, AGM, and Gel VRLA and NiCad batteries.

Flexibility, Parallel Running, System Expansion

Master MPS has been designed for a number of applications from IT to the most demanding electrical environments. With a wide range of accessories (UGS - UPS Group Synchroniser and PSJ - Parallel Systems Joiner), Master MPS can be configured into a suitable architecture for the most critical load applications. The UPS can be operated in parallel mode (redundancy and power) configurations, and are compatible with the Riello UPS UGS and PSJ devices to achieve further system resilience.

Ease of Installation

Master MPS has been designed for compact environments. Its foot print is extremely small - only 0.64 sq. m. for the 200kVA UPS). Master MPS also provide easy front access for maintenance to the important assemblies and a built-in control panel for system setting and measurement. Ventilation is provided by fans in the top of the UPS cabinet which draw air vertically up through the system. This further helps to reduce the amount of room the UPS requires in an installation as it can be put against a wall – no rear access is required.

Advanced Communication

Each Master MPS has a mains adapter slot; ESD contact (Emergency Switching Device) for use with remote Emergency Power Off switches and optional remote mimic panel (LED or LCD). Master MPS is supplied with PowerShield software as standard and can be remotely monitored using the TeleNetguard monitoring system from anywhere in the world. Additional remote monitoring can be achieved using PowerNetGuard on Wide Area Networks or the with text alerts for site problems, and the range of NetMan SNMP interfaces and MultiCom adapters and desktop monitoring panels such as Multipanel available.

MULTI DIALOG 60-80kVA - MDT 3/3 series

An Uninterruptible Power Supply (UPS) for the power protection of corporate wide and large network applications. The Riello UPS Multi Dialog Uninterruptible Power Supply range is the ideal solution for computer and telecoms users wanting a flexible multiple operating format power system with advanced communications features.

Uninterruptible Power Supply with multiple operating modes

The Multi Dialog Uninterruptible Power Supply series UPS uses double conversion on-line technology (VFI) and has several other operating mode options. Multi Dialog AF systems incorporate an harmonic filter to achieve less than 4% harmonic distortion and a near perfect sinewave absorption from the mains.
In on-line mode the load is powered continuously by the inverter to remove sags, surges and brownouts, through EMI filters to suppress transients, spikes and electrical noise. Even on bypass the load is routed through the filters so that the load is not connected to raw mains.
When the mains fails, the inverter which is constantly powering the load simply draws power from the internal battery to provide complete protection.

UPS Operating Modes

As well as the its on-line operating mode, Multi Dialog can operate in:

• Economy Mode: uses Line Interactive (VI) technology to power less critical loads from the mains supply for certain periods. The function can be set from the front panel keypad or remotely using software
• Smart Active: if the mains supply is out of range, the UPS will power the load from the inverter as an On-line UPS. When the mains supply returns to within range again, the UPS will monitor this for a certain period before selecting Line Interactive operation
• Standby/Off: for security applications like emergency lighting where the UPS is switched on but the loads are powered through the bypass supply. When the mains fails or falls outside a preset range the inverter automatically powers the load. This operation is similar to that of a standby uninterruptible power supply.
• Frequency conversion: 50 or 60Hz
• Automatic Voltage Stabiliser: voltage stabilisation with the inverter and battery completely disabled.

Extended Runtimes

As the inverter is rated for continuous operation this type of uninterruptible power supply can be used to support large loads for long runtimes up to and over 7 hours or more in duration. This can be achieved using battery extension packs that connect in series to the rear panel connector on the UPS and/or a generator. When battery extension packs are used these may have their own mains powered chargers to maintain a reasonable recharge time of the complete battery set. For larger loads consider the Master Plus.
Whatever the runtime installed there should be sufficient time for the protected computer systems to be shutdown in an orderly manner using the PowerShield software, supplied as standard, for Windows 95, 98, 2000, 2003, Me, XP, Mac OSx, 9.x, Linux NT 4.0 operating systems. Additional remote monitoring can be achieved using PowerNetGuard on Wide Area Networks or the Telenetguard remote service monitoring system with text alerts for site problems, and the wide range of NetMan SNMP interfaces and MultiCom adapters available.

Advanced Communication

• advanced, multi-platform communication, for all operating systems and network environments: PowerShield supervision and shut-down software included, with SNMP agent, for Windows 95, 98, 2000, 2003, Me, XP, Mac OSx, 9.x, Linux, NT 4.0, Novell operating systems. The UPS is equipped with a cable for direct connection to the PC (Plug and Play)
• double RS232 serial port
• network adapter slot for SNMP agent
• EPO (Emergency Power Off) shut down input contact
• remote control panel

Features

• reliable, filtered, stabilised and regulated sinewave output (double on-line conversion technology VFI according to EN50091-3 specifications) with filters for atmospheric disturbance suppression
• high reliability: IGBT technology, full microprocessor control with no-break static and manual bypasses
• 0.8 power factor makes Multi Dialog suitable for powering ICT and industrial loads
• high level diagnostics: event log with 128 messages, states, measurements and alarms - available from the built-in LCD in several languages
• the UPS may be configured with the RS232 serial port (flash up gradable)
• power factor correction with sinusoidal input to ensure a low impact on the mains supply for the single-phase/single-phase series
• reduced noise levels: high frequency inverter bridge used (>16 kHz: above audible range)
• low power consumption up to 92% in On-line mode due to the use of IGBT technology and up to 98% in the other operating modes: “Economy Mode”, Smart Active Mode, and Standby/Off Mode.
• low harmonic pollution in the Multi Dialog CLEAN (AF series) the electronic digital (DSP control) active filter achieve a very low total harmonic distortion (THDi<4%)
• compact cabinet (internal option)
• high reliability (failure of the active filter does not affect UPS operation)
• high efficiency: the active filter does not reduce operational efficiency
• simple to install:
  • capability to connect the UPS both to single-phase and three-phase mains supplies
  • panel to offset voltage drop down long cable runs
• maximum reliability and power availability - connect up to 8 units in parallel or N+1 redundancy, even of different power ratings
• power factor correction (input power factor, close to 1)
• high level battery reliability:
  • automatic battery test
  • recharge compensated for temperature
• emergency operation: the UPS can be set to operate only when the mains fails (for emergency lighting)
• back feed protection: to avoid energy feeding back into the mains supply
• by pass may be deactivated to allow operation as a frequency converter (at 50 or 60 Hz)
• easy to maintain (front access)

Multi Sentry UPS 10-120kVA - MCM & MSM 1/1 & 3/1, MCT & MST 3/3

Multi Sentry is a state-of-the-art Uninterruptible Power Supply, designed to meet VFI-SS-111 - the highest possible on-line double-conversion performance level within IEC EN 62040-3. The UPS is ideal for the power protection of critical operations and processes including: information and telecommunications systems, networks, services and processes. Sizes available include: 10, 12, 15, 20, 30, 40, 100 and 120kVA all with a three-phase input and output.

The Riello Multi Sentry UPS is one of the most efficient systems available and has a minimal impact on its environment and upstream power sources.

Uninterruptible Power Supply with multiple operating modes

Multi Sentry UPS have been designed for an easy install, especially on sites with limited power capacity available, a generator and harmonic compatibility problems. Typical features include:

• low input current distortion - less than 3%
• high input power factor 0.99
• power walk-in function to achieve progressive rectifier start-up
• delayed start-up on mains power supply return

The UPS also acts as a high performance filter to protect its supplies from load induced harmonics and reactive power.

Multi Sentry has a unique battery care system to optimise battery performance, extend working life and guarantee the UPS is fit to deliver its full-rated runtime when called upon to do so - in the event of a complete mains power failure. The UPS is designed to operate with a range of battery types: VRLA AGM and GEL lead-acid batteries including open-vented types, in addition to Ni-Cads.
Specific Battery Care features include:

• One-level recharge to meet the requirements of the most common VRLA AGM batteries.
• Two voltage level recharge meeting the IU characteristic.
• Restricted charging to reduce electrolyte consumption and extend the life of VRLA batteries.
• Temperature compensation: to avoid excessive voltage being applied to the batteries in a high ambient.
• Built-in battery testing to enable predicted failure reports and detect performance degradation.
• Deep battery discharge protection: to prevent over discharging the battery set.
• Low AC ripple current, achieved using a high-frequency battery charger.
• Wide input voltage range, with a rectifier that can work down to less than 40% of its nominal supply rating.

Multi Sentry can be used for a wide range of applications with several customisation options and accessories providing flexibility and a choice of performance levels:
• compatible with capacitive loads - without any reduction in active power (0.9 lead to 0.9 lag).
• multiple operating modes: On-Line, Eco, Smart-Active and Stand-By/Off and frequency conversion.
• PowerShare connections for priority-based load shedding on mains power supply failure.
• cold-start facility to allow the UPS to be switched on even without a mains power supply present.
• extended runtime options using battery extension cabinets.
• battery cabinet temperature sensor option to assist the temperature compensating charger.
• larger battery charger options to optimize recharge times.
• dual input supplies options for added resilience.
• isolation transformer options for Galvanic isolation and neutral connectivity.

The UPS has a large front panel graphical display to provide information such as real-time measurements, operating status and alarms conditions - in five different languages in addition to RS232 and USB serial ports. The UPS is fully compatible with TeleNetGuard monitoring system for remote site service assistance. Multi Sentry is supplied with PowerShield software as standard. The UPS has three communication slots for accessories including: network adapters and volt-free contacts, a REPO (Remote Emergency Power Off) to shut down the UPS remotely in an emergency and input connection with an auxiliary contact for an external manual bypass.

Sentinel Power UPS 5-10kVA

An Uninterruptible Power Supply (UPS) for the power protection of large file servers, voice and data networks, communications cabinets and large telephone switches.
The Riello UPS Sentinel Power UPS range is the ideal solution for computer and telecoms users wanting a flexible multiple operating format power system with advanced communications features. The UPS can run from a single or three phase supply and provide a single phase output with battery extension packs to provide long runtimes.

Single and Three Phase Uninterruptible Power Supply Installation

• 5-6kVA single/single phase
• 6.5-10kVA single/single phase or three/single phase

Note the simple installation: the UPS can be connected both to single-phase and three-phase mains supplies.

Uninterruptible Power Supply - on-line power protection

The Senitnel Power UPS uses double conversion on-line technology (VFI) and has several other operating mode options.
In on-line mode the load is powered continuously by the inverter to remove sags, surges and brownouts, through EMI filters to suppress transients, spikes and electrical noise. Even on bypass the load is routed through the filters so that the load is not connected to raw mains.
When the mains fails, the inverter which is constantly powering the load simply draws power from the internal battery to provide complete protection.

UPS Operating Modes

As well as the its on-line operating mode, Sentinel Power can operate in:

• Economy: uses Line Interactive (VI) technology to power less critical loads from the mains supply for certain periods. The function can be set from the front panel keypad or remotely using software
• Smart Active: if the mains supply is out of range, the UPS will power the load from the inverter as an On-line UPS. When the mains supply returns to within range again, the UPS will monitor this for a certain period before selecting Line Interactive operation
• Standby/Off: for security applications like emergency lighting where the UPS is switched on but the loads are powered through the bypass supply. When the mains fails or falls outside a preset range the inverter automatically powers the load. This operation is similar to that of a standby uninterruptible power supply.
• Frequency conversion: 50 or 60Hz

Extended Runtimes

As the inverter is rated for continuous operation this type of uninterruptible power supply can be used to support large loads for long runtimes up to and over 7 hours or more in duration. This can be achieved using battery extension packs that connect in series to the rear panel connector on the UPS. When battery extension packs are used these may have their own mains powered chargers to maintain a reasonable recharge time of the complete battery set. For larger loads consider the Multi Plus.
Whatever the runtime installed there should be sufficient time for the protected computer systems to be shutdown in an orderly manner using the PowerShield software, supplied as standard, for Windows 95, 98, 2000, 2003, Me, XP, Mac OSx, 9.x, Linux NT 4.0 operating systems. Additional remote monitoring can be achieved using PowerNetGuard on Wide Area Networks or the TeleNetGuard remote service monitoring system with text alerts for site problems, and the wide range of NetMan SNMP interfaces and MultiCom adapters available.

Advanced Communication

Advanced, multi-platform communication for all operating systems and network environments: PowerShield UPS monitoring and control software included, with SNMP agent, for Windows 95, 98, 2000, 2003, Me, XP, Mac OS X, 9.x, Linux, NT 4.0, Novell operating systems.

• the UPS is supplied with a communications cable for ‘Plug and Play' PC connection
• RS232 serial port (double serial port optional)
• network adapter slot for SNMP agent
• rear panel IEC socket for supplying local loads
• EPO (Emergency Power Off) contact for remote UPS shut-down

Features

• reliable, filtered, stabilised and regulated sinewave output (double conversion on-line technology VFI according to EN50091-3 specifications) with filters for atmospheric disturbance suppression
• high reliability: full microprocessor control with no-break static and manual by-pass
• high level diagnostics: states, measurements and alarms - available from the built-in LCD
• power factor correction with sinusoidal input to ensure a low impact on the mains supply (UPS input power factor, close to 1) for the single-phase/single-phase series
• very low noise level <40dB(A)
• low power consumption (“Economy Mode”, Smart Active Mode, and Standby/Off Mode to increase efficiency up to 98%)
• simple to install:
  • capability to connect the UPS both to single-phase and three-phase mains supplies (PWP 650-800-1000 models
  • output terminal block + 2 IEC outlets for powering local equipment (computers, modems and notebooks)
  • easy to position (integrated castors)
• built-in automatic and manual battery test feature
• auto restart on mains return (programmable - software or from the front panel)
• back feed protection as standard: to avoid energy feeding back into the mains supply
• integrated automatic and manual by-pass.

Sentinel Dual High Power UPS 3.3-10kVA - SDL series

An Uninterruptible Power Supply (UPS) for the power protection of medium sized file servers, voice and data networks, communications cabinets and telephone switches.
The Riello UPS Sentinel Dual HP UPS range is the ideal solution for computer and telecoms users wanting a flexible multiple operating format power system capable of either floor standing or 19" rackmount format for use in communication cabinets. In 2004 the product won the Electrical Products Award for innovation.

Uninterruptible Power Supply with multiple operating modes

The Sentinel Dual HP UPS is available in 3300-10000VA (single/single phase models) and uses double conversion on-line technology (VFI) with several other operating mode options.
In on-line mode the load is powered continuously by the inverter to remove sags, surges and brownouts, through EMI filters to suppress transients, spikes and electrical noise. Even on bypass the load is routed through the filters so that the load is not connected to raw mains.
When the mains fails, the inverter which is constantly powering the load simply draws power from the internal battery to provide complete protection.

Extended Runtimes

As the inverter is rated for continuous operation this type of uninterruptible power supply can be used to support large loads for long runtimes up to and over 7 hours or more in duration. This can be achieved using battery extension packs that connect in series to the rear panel connector on the UPS. When battery extension packs are used these may have their own mains powered chargers to maintain a reasonable recharge time of the complete battery set. For larger loads consider the Sentinel Power
Whatever the runtime installed there should be sufficient time for the protected computer systems to be shutdown in an orderly manner using the PowerShield software, supplied as standard. Additional remote monitoring can be achieved using PowerNetGuard on Wide Area Networks or the TeleNetGuard remote service monitoring system with text alerts for site problems, and the wide range of NetMan SNMP interfaces and MultiCom adapters available.

Advanced Communication

Advanced, multi-platform communication for all operating systems and network environments: PowerShield UPS monitoring and control software included, with SNMP agent, for Windows 95, 98, 2000, 2003, Me, XP, Mac OS X, 9.x, Linux, NT 4.0, Novell operating systems.

• the UPS is supplied with a communications cable for ‘Plug and Play' PC connection
• RS232 serial port (double serial port optional)
• network adapter slot for SNMP agent
• rear panel IEC socket for supplying local loads
• EPO (Emergency Power Off) contact for remote UPS shut-down

Installation and Ease of Use

• the UPS can be installed as a floor standing tower or 19” rackmount. The front panel digital display can be pulled out (using the keys provided) and rotated to suite the installation format
• low noise level (<40dBA) thanks to the digitally PWM controlled ventilation system which is load and temperature dependent, and the use of an inverter with a high switching frequency (>20kHZ, above the audible range). Dialog Dual is suitable for installation in any populated environment.

UPS Operating Modes

As well as the its on-line operating mode, Sentinel Dual can operate in:

• Economy: the UPS mimics a Line Interactive (VI) UPS supporting the load from its battery supply when the mains fails or fluctuates wildly
• Smart Active: the UPS selects automatically whether to operate in On-line (VFI) or Line Interactive (VI) mode depending on the stability of the mains supply
• Emergency: the UPS only supports the load with its batteries when the mains fails - suitable for emergency lighting
• Frequency conversion: 50 or 60Hz

Other use selectable customisation points include:

• output voltage selection: 220-230-240Vac
• auto restart on mains return set from the front panel or PowerShield software
• automatic output delay when the UPS powers up
• automatic power down when no load is present
• end of battery discharge pre-alarm

Power Quality

• filtered, stable and regulated - double conversion on-line (VFI) technology in accordance with EN50091-3, a with EMI filters
• guaranteed output quality even with typical distorting IT loads with crest factors of 3:1
• low impact on the mains supply as the UPS has an input power factor close to 1, with a sinusoidal input current

High Reliability

• completely digitally controlled
• uninterrupted automatic by-pass
• the by-pass can be activated manually
• use of IMS (Insulated Metallic Substrates) modules

Advanced Diagnostics

• status, measurements, and alarms available on the standard backlit display
• UPS can be updated digitally (flash upgrade able)

Optimal Battery Management

• reliable battery performance (automatic and manual battery tests)
• prolonged battery life due to the unique Low Ripple Current Discharge (LRCD)
• ‘hot-swap' user replaceable batteries
• extendible back-up time using additional battery extension packs or trays
• increased ride through (without batteries) on mains breaks up to 40ms and for fluctuations ranging from 84 to 276Vac

Enhanced Electrical Performance

• input protected by resettable thermally activated switch
• back-feed protection: to avoid energy being fed back into the mains should a fault occur
• increased short circuit current on the by-pass
• increased overload capacity: 150% on inverter even without a mains supply present
• performance guaranteed in temperatures up to 40°C
• manual switch to by-pass

1000VA - 3000VA Sentinel Dual Low Power - SDH Series

Sentinel Dual is the high density version of the Sentinel Pro range of double-conversion on-line UPS. Sentinel Dual is designed to power critical loads such as servers, storage systems, telephone equipment, medical systems and industrial applications; and is ideal for Blade servers with an input power factor close to unity (1).
Designed with the environment and efficiency in mind, the Sentinel Dual is part of the Riello ECO Line of Uninterruptible Power Supplies (UPS), and achieves an on-line operating efficiency of 92%
The flexible and functional design of the Sentinel Dual allows the UPS to be used as a tower unit, or by simply rotating the mimic panel, it can be used within a rackmount cabinet, taking up only 2U in height.
Available models include 1000VA, 1500VA, 2200VA and 3000VA, and incorporates a 'Power-Off' function found in other Riello ECO Line UPS.

Extended Runtimes

For applications requiring longer runtimes, Sentinel Dual can be installed with battery extension packs (ER models) which also include additional battery boost chargers.

Advanced Communication

In terms of communication, each Sentinel Dual has a built-in mimic panel with an LCD to show input and output voltages, and battery charge status. This panel can be turned through 90^o to best suit the installation. The Sentinel Dual also offers maximum flexibility for integration for integration with any communication system.
Multiplatform communication for all operating systems and network environments;
Powershield3 UPS monitoring and control software included for Windows 7, 2008, Vista, 2003, XP, Linux, Mac OS X, Sun Solaris and VMware ESX operating systems and other Unix operating systems.
Sentinel Dual UPS also have USB communication ports as standard, with a expansion slots for additional adapters, protocol converters and related contact cards.

Features

• Filtered, stabilised, reliable output voltage: on-line double conversion technology (VFI in accordance with    IEC 62040-2 class C1)with built-in EMI filters
• High overload capability up to 150% from inverter
• Programmable auto-restart when mains power returns
• Programmable cold-start from battery
• Power factor correction (UPS input power factor close to 1)
• Possibility to extend autonomy for several hours
• Fully configurable using UPS Tools configuration software
• High level of battery reliability (automatic and manually activated battery tests)
• High level of UPS reliability (total microprocessor control)
• Input protection

700VA - 3000VA Sentinel Pro - SEP Series

Sentinel Pro is the latest evolution of the successful Riello Dialog Plus online UPS. Designed with the environment and efficiency in mind, the Premium Pro is part of the Riello ECO Line of UPS.
Sentinel Pro is an on-line double-conversion Uninterruptible Power Supply (UPS) offering the highest levels of resilience and protection for critical servers, voice and data processing IT systems.
Available models include 700VA, 1000VA, 1500VA, 2200VA and 3000VA.
In terms of communication, each Senitnel Pro has a built-in mimic panel with an LCD to show input and output voltages, and battery charge status. The inverter is a totally new design, fully microprocessor controlled and constructed to achieve the highest levels of operating efficiency and configuration options.

Extended Runtimes

For long runtime applications, Sentinel Pro (ER models) can be fitted with matching battery extension packs which also include additional battery boost chargers.

Advanced Communication

Advanced multiplatform communication for all operating systems and network environments; Powershield3 UPS monitoring and control software included for Windows 7, 2008, Vista, 2003, XP, Linux, Mac OS X, Sun Solaris and VMware ESX operating systems and other Unix operating systems. Premium Pro UPS also have USB communication ports as standard, with a built-in expansion slot for additional adapters, protocol converters and related contact cards.

Energy Efficient

Sentinel Pro is highly efficient, and has a push-button power-off feature to reduce energy consumption to zero when there is no load connected.

Features

• Filtered, stabilised, reliable output voltage: on-line double conversion technology (VFI in accordance with  IEC 62040-3)with built-in EMI filters
• High overload capability up to 150%
• Programmable auto-restart when mains power returns
• Programmable cold-start from battery
• Power factor correction (UPS input power factor close to 1)
• Wide input voltage tolerance (from 120-280Vac) without battery usage
• Possibility to extend autonomy for several hours
• Fully configurable using UPS Tools configuration software
• High level of battery reliability (automatic and manually activated battery tests)
• High level of UPS reliability (total microprocessor control)
• Low impact on the mains (sinusoidal absorption)
• Input protection with fuse which can be reset.

DIALOG VISION UPS 500-3000VA - DVR & DVD series

The Dialog Vision Uninterruptible Power Supply provides a digital sinewave output supply on mains and battery power and is ideal for the power protection of sensitive loads within small-to-medium sized networks. The UPS is available in slim-line (1U high) rack mount, floor standing and combination formats. Each UPS has an easy to view LCD providing a wealth of operating status information. Sizes available include: 500VA, 800VA, 1100VA, 1500VA, 2000VA, 2200VA and 3000VA.

Uninterruptible Power Supply - Line Interactive

The Dialog Vision series includes the DVR (Rack version) and DVD ( Dual Rack/Tower verison) with models from 500VA to 3000VA and use sinewave digital technology.
The Dialog Vision range, with its advanced commuications and connectivity options, is the ideal solution for the most demanding of customer looking for superior protection and versatility.
An Automatic Voltage Regulator (AVR) provides stabilisation from brownouts, sag and surge voltages. EMI filters then provide further protection from spikes and transients.
When the mains power supply fails, the load is powered by the inverter and receives a true sinewave supply for maximum power continuity and reliability.

Extended Runtimes

Additional Battery Boxes (with chargers) are available for the DVD 220 and 300 for longer runtime time applications.

Advanced Communication

Advanced, multi-platform communication for all operating systems and network environments: PowerShield UPS monitoring and control software included, with SNMP agent, for Windows 95, 98, 2000, 2003, Me, XP, Vista, Mac OS X, 9.x, Linux, NT 4.0, Novell operating systems. A wide range of NetMan SNMP interfaces and MultiCom adapters is available for this UPS. USB or RS232 serial port (selectable)

Features

• Automatic Voltage Regulator (AVR) providing protection from sags, surges and brownouts
• EMI filtered spike and electrical noise protection
• front panel LDC providing real-time measurements, operating status and alarms conditions.
• sinewave output inverter on mains and battery power
• PowerShare socket for load-shedding to increase battery runtime on mains power supply failure
• hot-swap batteries for ease of maintenance
• predictive testing to ensure battery performance is optimised
• battery extension packs (DVD 2200 and 3000) to extend the internal battery runtime to several hours
• slim-line rack mount (DVR) and dual (DVD) formats
• Dialog Vision Dual (DVD 1500, 2000 and 3000) format for floor standing or rack mount installation
• Emergency Power Off (EPO) - DVD and DVR models
• Cold-start facility to enable power up without a mains power supply present

Vision UPS 800-2000VA

The new VISION series from Riello is a UPS ideal for solving power problems within small to medium sized networks or IT applications.  An evolution of the highly successful Dialog Vision range, this new compact and reliable range offers superior protection, versatility and advanced communication features.
The VISION (VST) is compact and versatile Tower UPS. Models range 800VA to 2000VA and utilise sinewave digital technology.
Operating at 98% efficiency and with low energy consumption, the VISION is part of the ECO Line range, and is ideal solution for the protection for peripheral network devices, conventional servers, and network back-up systems; providing a high level of protection against mains power disturbances.
An AVR (Automatic Voltage Regulator) provides protection from brownouts, surges, overvoltages and undervoltage without battery intervention. Reduced battery usage ensures that the battery set is 100% available for mains power failures.
EMI filters provide further protection from surges and transients. When the mains power supply fails, the load is powered by the inverter, providing a perfect sinewave for maximum power continuity and reliability.

Availability

A Power Share socket allows load-shedding and the shutdown of less critical peripheral devices to extend the battery runtime. “Hot Swap” batteries can be removed via the front panel for easy and safe UPS maintenance. Battery test facilities detect deteriorating battery performance and failure, whilst deep discharge protection reduce general battery ageing.

Advanced Communication

• Advanced communication, multi-platform, for all operating systems and network environments: PowerShield3 supervision and shut-downsoftware for Windows operating systems 7, 2008, Vista, 2003, XP, Linux, Mac OS X, Sun Solaris, Linux, Novell and other Unix operating systems.
• USB or RS232 (selectable)
• Expansion slot for SNMP network adapter card
• statuses, measurements, alarms, and input, output and battery parameters available on LCD display.

NET DIALOG UPS 800-2000VA - NDG series

An Uninterruptible Power Supply (UPS) for the power protection of personal computers, Point of Sale terminals, key phone systems and small to medium sized file servers.
The Riello UPS Net Dialog UPS range is the ideal solution for small office hardware requiring power protection from a wide range of power problems in a robust format product with advanced communications capabilities and the ability to support small loads for long runtime periods.

Uninterruptible Power Supply - line interactive power protection

The Net Dialog UPS series includes 800-1000-1500-2000VA models and uses digital Line Interactive (VI) technology. The load is powered from the mains through an Automatic Voltage Stabiliser (AVS) to stabilise brownout, sag and surge voltages, and EMI filters to suppress spikes and transients.When the mains fails, the load is powered by the inverter with a pseudo sinewave to provide sufficient runtime for computer system shutdown using the PowerShield software supplied as standard. The UPS also incorporates a filtered socket for PC network and telephone line cable protection.

Advanced Communication

Advanced, multi-platform communication for all operating systems and network environments: PowerShield UPS monitoring and control software included, with SNMP agent, for Windows 95, 98, 2000, 2003, Me, XP, Mac OS X, 9.x, Linux, NT 4.0, Novell operating systems. A wide range of NetMan SNMP interfaces and MultiCom adapters is available for this UPS.

Features

• line Interactive (VI) technology with AVR and filters for atmospheric disturbance suppression
• mains power supply stabilisation and filtering
• cold start capability: the UPS can power up without a mains supply present
• auto restart at power-up
• integrated protection for telephone/modem lines
• high reliability with built-in automatic battery test feature.

iDialog UPS 400-800VA - ID, IDP series

The iDialog Uninterruptible Power Supply has been designed to protect PCs and critical peripherals in home and small office environments. iDialog is easy to install and provides powerful, economic protection for: IT equipment including PCs, Media Centers, PoE, Voip and other such peripherals, TVs, Home Cinemas, Satellite and Digital Terrestrial receivers, DVD readers and writers, Modems and xDSL routers and Small household appliances.

Uninterruptible Power Supply - power protection

The iDialog UPS range includes the 400-600-800VA models and has the following characteristics:

• Maximum power protection with PowerShield UPS monitoring and shutdown software available for free download from our website www.riello-ups.com.
• Suitable for installation on PCs running Windows Vista, 2003, XP, 2000, Me, 98; Linux, Mac OSX and the Sun Solaris operating system.
• Compact dimensions and ergonomic design: iDialog can be placed on a desk top or other convenient location, with easy to access connections and informative front panel.
• Front panel LCD display (IDP - Plus version only) providing status, load and battery information and LEDs (standard version).
• Silent running: iDialog can be used to protect other senstiive electronic devices including Home Cinemas, CD Writers, DVD players, Satellite and Digital Terrestrial receivers.

Extended Runtimes

Extended runtimes are possible by over sizing the UPS for the application as the iDialog has no battery extension capability. For larger loads see the NET DIALOG UPS or see the DIALOG PLUS for an on-line uninterruptible power supply alternative with extended runtime capabilities.

Advanced Communication

For additional security users can download a version of the PowerShield UPS monitoring and control software from the Riello UPS software website at www.ups-technet.com.

UPS RIELLO - AROS, iPlug 600-800VA

The iPlug series of uninterruptible power supplies is the ideal solution for protecting personal computers, scanners, printers, modems, TVs, DVD readers, Games Consoles, Hi-fis, phones, fax machines and other critical peripherals in household and small home-office environments. Compact and versatile, the iPlug features an LED status panel and user-replaceable batteries to ensure iPlug is easy to install and operate; providing economic and efficient protection from surges and blackouts. As part of the Riello ECO Line of energy efficient UPS, the iPlug represents cost-effective protection for the domestic environment.
When mains power fails, the load is powered by the inverter and built-in battery. Powershield3 UPS software then safely shuts down the system, protecting your equipment from potential damage and data loss.

Advanced Communication

PowerShield3 UPS monitoring and control software (available for download from www.riello-ups.com) can be used for an orderly unattended shutdown of systems installed with Windows 7, 2008, Vista, 2003, XP, Linux, Mac OS X and Sun Solaris O/S.

Features

• Energy efficient ECO LINE product
• Compact, ergonomic design
• 5 sockets with battery backup
• 3 sockets with surge protection only
• Cold start capability to power up the UPS without mains power
• User replaceable batteries
• USB interface for remote monitoring
• Power cable included
• Protection from short-circuits
• Auto restart - when the mains returns after battery discharge
• GS/Nemko safety marking